| Media | Water |
| End Connection | Threaded |
| Configuration Type | Simplex |
| Brand | Activeline |
| Capacity | 10 kg |
| Flow Rate | 5 lpm |
| Material | Stainless Steel |
"Activeline Engineering"
The length and diameter for each strainer shall be as given in the following table/at the item description. The filter element shall be made from SS 304 perforated sheet. The perforation shall be as given in the table. One end shall be provided with φ5mm SS rod as shown in the figure. At both ends 1.6mm thick X 10mm wide rings of SS 304 are to be tack welded on OD. The joint shall be full welded using TIG welding process. Edges to be smoothly trimmed/finished, free from any burr, sharpness etc. strainers are designed for 'temporary' or short periods of operation, for example during commissioning and initial start-up periods of new or reconditioned process lines to remove any coarse debris such as rags, welding rods, pipe scale, rust etc accidentally or unavoidably present within the system.
After a nominal period of operation Conical Strainers are usually replaced with a permanent strainer of fine filtration. (Y-Type Strainers or Basket Strainers).