Activeline Engineering
Odhav Ahmedabad, Gujarat
GST No. 24ANYPC6972A1ZV
Call 0794934435866% Response Rate
Send Enquiry
Filter Elements
Our range of products include cylindrical filter element and bucket filter element.
Cylindrical Filter Element
Get Best Quote
Rs 1070 / PiecePrice on Request
Product Brochure
| Micron Rating | 100 micron |
| Length | 20 inch |
| Filter Media | SS Wire Mesh |
| Outer Diameter | 70 mm |
| Inner Diameter | 68mm |
| End Connection | Open Both Ends |
| Working Pressure | 10 bar |
"Activeline Engineering"
The length and diameter for each strainer shall be as given in the following table/at the item description. The filter element shall be made from SS 304 perforated sheet. The perforation shall be as given in the table. One end shall be provided with φ5mm SS rod as shown in the figure. At both ends 1.6mm thick X 10mm wide rings of SS 304 are to be tack welded on OD. The joint shall be full welded using TIG welding process. Edges to be smoothly trimmed/finished, free from any burr, sharpness etc.
The length and diameter for each strainer shall be as given in the following table/at the item description. The filter element shall be made from SS 304 perforated sheet. The perforation shall be as given in the table. One end shall be provided with φ5mm SS rod as shown in the figure. At both ends 1.6mm thick X 10mm wide rings of SS 304 are to be tack welded on OD. The joint shall be full welded using TIG welding process. Edges to be smoothly trimmed/finished, free from any burr, sharpness etc.
View Complete details
Yes! I am InterestedRequest a call back
Bucket Filter Element
Get Best Quote
Rs 5800 / PiecePrice on Request
Product Brochure
| Minimum Order Quantity | 1 Piece |
| Micron Ratings | 10 Micron |
| Micron Rating | 10 micron |
| Filter Media | SS Wire Mesh |
| Shape | Cylindrical |
| Filter Type | Water Filter |
| Material | Stainless Steel |
| Element Type | Wire Mesh /Screen |
| Application | Water |
| Country of Origin | Made in India |
"Activeline Engineering"The length and diameter for each strainer shall be as given in the following table/at the item description. The filter element shall be made from SS 304 perforated sheet. The perforation shall be as given in the table. One end shall be provided with φ5mm SS rod as shown in the figure. At both ends 1.6mm thick X 10mm wide rings of SS 304 are to be tack welded on OD. The joint shall be full welded using TIG welding process. Edges to be smoothly trimmed/finished, free from any burr, sharpness etc.
View Complete details
Yes! I am InterestedRequest a call back
EXPLORE MORE CATEGORIES
